LPG (liquefied petroleum gas) is used in industrial, commercial, agricultural, and manufacturing applications.
LPG is a mix of propane (C3H8) and Butane (C4H10)
Simple Skid:
LPG Skid Station (Autogas Filling Sation ) , it is mobile station builted on steel chasssis used for filling car or gas cylinders
Dispenser single or double nozzle can be used for filling car or gas cylinder , the dispenser can mesuaring by ( LT) or ( kg - mass flow )
The scales used for filling gas cylinder, the scales can be mechanical or electronic ( digital )
The welding tests that can be done : UT (Ultrasonic Test ) and RT ( RadiographicTest ) for joints, BT Test will be done for welded flanges
The hydrostatic test will be done by water pressure according to code by THIRD PARTY
Skid with automation system :
This kind of skids provided with tank gauging system
In this case the skid will be automated by adding automation devices : gauging probe, software connected to PC ...etc
This software connected to this system can show all needed reports for user , like daily report , shift report, density ,gas level in the tank ...etc
The system provided with high safety shut down system by adding sensors around station ,these sensors connected to electronic panel
In case of gas leakage from the system, the gas sensor will give the order to system to shut down by closing the Pneumatic valves and LPG pump that connected to this system
DESIGN PARAMETERS FOR SKID TANK (PRESSURE VESSEL) | |
---|---|
Design Code | AD 2000 MERKBALTTER, EN 12493 ,EN 13445 ,ASME CODE and other codes |
Capacity | ( 5 - 100 m3 ) |
Body Type | Horizontal, Cylindrical |
Heads Type | Elliptical or Hemispherical , Heat treatment 600 C º |
Material | SA 516 Gr 70 / EN-10028.3 ( P355NH-P355NL1) / EN-10028.2 ( P355GH-P265GH) |
Design Temperature | (-20 C° / +70 C°) |
Design Pressure | 17,1 - 18 BAR |
Test Pressure | 26,25 - 27.5 BAR |
Welding | SAW -Submerged Arc Welding |
Piping | SCH 40, SCH80 seamless pipes |
Tests | UT (Ultrasonic Test ) - X-Ray :RT ( RadiographicTest ) - BT ( Beta Test ), Hydrostatic Test |
Paint | Sandblasting will be done firstly, 2 layers of epoxy base paint, then 2 layers of paint. |
LIST OF ACCESSORIES CAN BE USED FOR SKID | |
---|---|
Dispenser : Single or double nozzle D, working with LT or KG (Mass flow ) | |
LPG pump : 8 stages- DN50 with ex-proof motor 4,5 kw | |
Mechanical and Electronic (Dijital) Scales are available | |
2 ʺ , 1 ¼ ʺ , 1/2 ʺ Pressure Relief Valve | |
DN50 - 2 ʺ Pneumatic Actuator Valve | |
Magnetic or Mechanical Level Indicator | |
1 ¼ ʺ Double Check Filler Valves- filling head | |
1 ʺ Bypass | |
Manometer (0 - 40 bar) | |
Thermometer (-20 / +70 C˚ ) | |
DN50 PN40 - 2 ʺ Monoblock Ball Valve | |
DN50 PN40 - 2 ʺ Strainer Valve | |
DN25 - 1 ʺ Drain Line | |
3 ¼ ʺ - 2 ʺ Acme Cap + Nipple | |
2 ¼ ʺ - 1 ¼ ʺ Acme Cap + Nipple | |
Gauging Probe |