Download catalogue
13,6 FRIGO REFRIGERATED SEMI TRAILER
Technical specifications
Download catalogue| 13,6 FRIGO REFRIGERATED SEMI TRAILER | |
|---|---|
| GVW– Gross Vechile Weight Permissible max laden mass |
35500 KG |
| Permissible max on king-pin | 11500 kg |
| Permissible max on axles | 8000 kg x 3 axles = 24000 kg |
| Total self weight without cooling unit | 7600 kg approximately |
| Overall Length | Outside 13600 mm - internal 13370 mm |
| Max Width | Outside 2600 mm - internal 2460 mm |
| Trailer height | 4000 mm |
| Box internal height | 2655 mm |
| Chassis | 4 mm Domex - SSAB is made from extremely clean steel, high-strength hot-rolled sheet steel with low-alloy lower and upper lama 120x10 mm / king-pin plate: ST52 - thick: 10mm |
| Axles | 3 x 9 Ton - SAF brand -Disc with 1 lifting axle |
| Suspension system | Air suspension system |
| Tires | 385/ 65 R22.5 (BRIDGESTONE ) – 7 adet |
| Rims | Steel rims 11,75 x 22,5 – 7 adet |
| Landing gears | 25 ton cpacity - SAF brand |
| King - pin | 2 inch - SAF brand / Load = 11500 kg |
| Break system | WABCCO EBS – According to EU standard |
| Electric system | 24 volt / 2 x 7 + 15 pin plug socket, according to Directive 75/756/EEC ASPOCK, SABA or SANEL with full led system according to EU standard |
| Fuel tank | 250-600 LT – Aluminum with level indicator |
| Box sides | 65 mm in total: 60 mm Extruded Polystyrene Foamboard –XPS PLUS T LB GV /Density 35 kg/m3 –standard : EN1602 Outer layer: 2 mm Fiberglass reinforced with mesh plastic Inner layer: 2 mm Fiberglass reinforced with mesh plastic |
| Box roof | 85 mm in total: 80 mm Extruded Polystyrene Foamboard –XPS PLUS T LB GV /Density 35 kg/m3 –standard : EN1602 Outer layer : 2 mm Fiberglass reinforced with mesh plastic Inner layer : 2 mm Fiberglass reinforced with mesh plastic |
| Front Wall | 85 mm in total: 80 mm Extruded Polystyrene Foamboard –XPS PLUS T LB GV /Density 35 kg/m3 –standard : EN1602 Outer layer : 2 mm Fiberglass reinforced with mesh plastic Inner layer : 2 mm Fiberglass reinforced with mesh plastic Supported with Steel structure inside the Wall to place the cooling unit with dimension Wx H : 1700 x 1175 mm |
| Rear doors | 85 mm in total: 80 mm Extruded Polystyrene Foamboard –XPS PLUS T LB GV /Density 35 kg/m3 –standard: EN1602 Outer layer: 2 mm Fiberglass reinforced with mesh plastic Inner layer: 2 mm Fiberglass reinforced with mesh plastic With stainless steel frame (chrome 304 L) Each door 4 hinges - Stainless steel Chrome Each door 2 set of external locks system - stainless steel chrome |
| Flooring | 125 mm in total: 100 mm Extruded Polystyrene Foamboard –XPS PLUS T RTM GV/Density 40 kg/m3-standard : EN1602 Upper layer: 3mm checkered Aluminum Middle layer: 21 mm plywood Lower layer: 2 mm Fiberglass reinforced with mesh plastic |
| Rear Ramp Buffer | Made of rubber with high quality 500x90 mm / 6 pcs : 2 pcs vertical and 4 pcs horizontal |
| Rear bumper | Stainless steel – or rubber |
| Side Guard | On the 2 sides - Made from aluminiuim profile according to the standard |
| Paint – Box | RAL 9016 sandblasting will be done firstly , then anti corrosion paint one layer epoxy ,then 2 layers of paint . |
| Certificate | ATP / FRC |
| Accessories | 2 ECE R70 reflectors Side walls Reflective strips white, rear Panel Reflective strips red 1 x Plastic anti-slip wheel stopper 1 x Tool box 1 x food box Spare tire carrier for 2 tires Water tank – chrome fire extinguisher box |